Draytek LAN to LAN VPN

Vigor - Example VPN Set-up using PPTP
Teleworker to Head Office

Windows 98 PPTP Client

A. For VPN Server Setup:

1.Common Settings:
a. Type the Profile Name.

b. Select "Enable this Profile".

c. Select Dial-In and set the Idle Timeout as 0 to retain this tunnel till terminated by the remote site.

3.Dial-in Settings:

a. Enable the PPTP tunnel.

b. Type the Username, Password.

4.TCP/IP Network Settings:

Type the Remote Network IP and Remote Network mask.

Screenshot


When VPN client successfully dials in, you may check the connection status in System Management> VPN Connection Management.

Screenshot


B. For VPN Client Setup:

1.Common Settings:

a. Type the Profile Name.

b. Select "Enable this Profile".

c. Select Dial-Out and set the Idle Timeout as 0 to retain this tunnel till terminated by the remote site.

If you select Always on, Vigor will try to reconnect if the tunnel is broken.

2.Dial-Out Settings:

a. Enable the PPTP tunnel.

b. Type the IP address or host name of VPN server.

c. Type the Username and Password.

4.TCP/IP Network Settings:

Type the Remote Network IP and Remote Network mask.

Screenshot


When VPN client successfully dials out, you may check the connection status in System Management> VPN Connection Management.

Screenshot


www.opal.co.uk